Brand Name: OEM
Model Number: KS**-DC
Place of Origin: Guangdong, China (Mainland)
SERO developed a more comfortable and ecological heating and cooling product, by experience of a wide range of products for saving, creating and storing energy with 17 years, SERO aims to contribute towards reducing CO2 emissions in the entire house and building.
SERO’S NEW AIR-TO-WATER HEAT PUMP:
Heat pump enable us to recover this free, inexhaustible energy and to use it to heat our homes. These systems have the huge, advantage, apart from reducing your electricity bill, of saving fossil fuels at the same time limiting greenhouse gas emissions.
DC inverter air to water system uses heat energy present in the outdoor air to heat the house, cool it and also produce hot water. The SERO MONOBLOC system therefore uses free energy to heat or cool your home. It only consumes electricity to operate the compressor, the electronics,and the pumps and in the event of very low temperature the DC inverter compressor will speed up its running, to keep a comfortable home temperature.
MONOBLOC SERIES A
The monobloc system SERIES A only has an outdoor unit, the installation doesn’t require a refrigerated
connection and it only connected to the heating system, this system therefore is easier to install.
* Energy and environmental efficiency
* DC inverter system with 76% more efficient than an electrical heating system
* Maximum COP of 4.2 at ambient temperature 7℃, water inlet/outlet 30/35℃
* Easy to use, without refrigerant connections
* Wired controller for installation in the house
* A COMPACT DESIGN: Outdoor unit easy to open for maintenance
* Works very well even at low ambient temperature
* Plastic shell type: never rust ! Metal shell type: galvanized after powder paint.
MONOBLOC SERIES B ( Free hot water in summer)
The monobloc system SERIES B has an outdoor unit and you can connect a water tank by refrigerant tubes
once you want 100% free energy for hot water when the heat pump is doing the cooling.
* Energy and environmental efficiency
* DC inverter system with 76% more efficient than an electrical heating system
* More high efficient for hot water (use refrigerant directly heating); and in summer with free hot water
* (when the heap pump is doing cooling, the water tank is doing heating) water
* Maximum COP of 4.2 at ambient temperature 7℃, water inlet/outlet 30/35℃
* Wired controller for installation in the house
* A COMPACT DESIGN: Outdoor unit easy to open for maintenance
* Works very well even at low ambient temperature
* Plastic shell type: never rust ! Metal shell type: galvanized after powder paint.
===================================================================================================
===================================================================================================
Our system have more advantage in defrosting.
There are 2 pieces additional electrical hearters in outdoor unit. One is compressor heater, the second one is buttom heater. They are very helpful to defrosting.
Specification of DC inverter Air to water Monobloc series
Specification of DC inverter all in one series(Air to water) |
|||||||
Model |
KS50-DC |
KS70-DC |
KS90-DC |
KS120-DC |
KS150-DC |
||
Nominal Capacity |
heating |
kW |
5.60 |
7.41 |
9.32 |
12.94 |
15.20 |
cooling(option) |
kW |
5.12 |
6.70 |
8.53 |
11.20 |
13.45 |
|
Nominal input |
heating |
kW |
1.31 |
1.77 |
2.27 |
3.17 |
3.86 |
cooling(option) |
kW |
1.87 |
2.42 |
3.02 |
4.13 |
5.10 |
|
COP |
4.27 |
4.19 |
4.11 |
4.08 |
3.94 |
||
EER |
2.74 |
2.77 |
2.82 |
2.71 |
2.64 |
||
Compressor |
type |
Rotary |
Rotary |
Rotary |
Rotary/Scroll |
Scroll |
|
Brand |
Sanyo |
Sanyo |
Sanyo/ Panasonic |
Sanyo |
Sanyo |
||
Operation ambient range |
°C |
-20 - 43 |
|||||
Sound pressure level |
heating |
dBA |
51 |
52 |
54 |
56 |
58 |
cooling |
dBA |
52 |
53 |
54 |
57 |
59 |
|
Refrigerant charge |
R-410A |
kg |
0.82 |
1.15 |
1.4 |
2.5 |
3.2 |
Dimensions |
WxHx D |
mm |
990x590x330 |
1020x700x355 |
1080x780x380 |
1030x1230x340 |
1150x1330x360 |
Weight |
kg |
66 |
71 |
90 |
112 |
138 |
|
Leaving water temperature range |
heating |
°C |
20-60 |
||||
cooling |
°C |
5 - 35 |
|||||
Hot water |
°C |
20 - 60 |
|||||
Water three way valve |
Yes |
||||||
Second heat exchanger |
Stainless steel plate |
||||||
Water pump |
Yes |
||||||
Shell material |
Epoxy polyester painted galvanised steel |
||||||
Additional electrical heater |
KW |
2 |
2 |
2 |
3 |
3 |
|
Power supply |
V/Hz/Ph |
230/50/1 |
400/50/3 |
400/50/3 |
|||
standard model is heating only.Cooling and heating is optional. |
|||||||
Measurement condition:A7/W35(heating mode),A35/W7(cooling mode). |
* Get more details please contact our Website or Company.